Model WHSR

Horizontal Lifting, Non-Locking

The Model WHSR is an adjustable, horizontal clamp
intended to be used in pairs, sets of pairs, or in a tripod
arrangement for transporting steel plates horizontally.

In addition to incorporating two gripping cams, the jaw
opening may be adjusted by the positioning of a pin in
the body of the clamp. The gripping cams are spring
loaded to remain in the "open" position until the load
is applied. This feature permits the clamp to be easily
applied and removed from the load. Normally furnished
with serrated gripping surfaces, it is available with smooth
faced bronze or stainless steel surfaces to prevent marring
when handling polished plates.